Garage Floor Coating
Full-broadcast flake and solid color systems for attached and ground-level garages.
Learn more
Myrtle Beach & the Grand Strand
Epoxy Flooring in Myrtle Beach, SC
Epoxy flooring in Myrtle Beach and across the Grand Strand: flake garage floors, polyaspartic and metallic coatings, pool decks, patios and commercial floors, installed over concrete that is tested, ground and repaired first.
Call UsOpen 24/7 · Free on-site estimates
Get a Free Epoxy Flooring Estimate
Send the details and we will contact you to schedule your free on-site estimate.
Who we are
Your Local Epoxy Flooring Company in Myrtle Beach
Epoxy Floor Installation Myrtle Beach is an epoxy flooring company based at 5082 Lafon Ln, Unit 11, in Myrtle Beach, SC. We install garage floor coating, polyaspartic floor coating, metallic epoxy, commercial epoxy flooring, pool deck and patio coatings, concrete polishing and concrete resurfacing for homes and businesses in Myrtle Beach, Socastee, Carolina Forest, Conway, Surfside Beach, Garden City, Murrells Inlet, North Myrtle Beach and Pawleys Island.
Concrete on the coast works hard. Humid air drives moisture up through slabs, salt air and sand reach every garage near the beach, and summer sun bakes porches and pool decks. A coating bonds only as well as the surface under it, so every epoxy floor installation in Myrtle Beach starts with a moisture test, diamond grinding and repairs to cracks and spalled spots. In garages we choose systems that resist hot tire pickup, and outdoors we finish with UV-stable topcoats.
Every estimate is free and on site. We look at the floor, explain which system fits the way you use the space, and give you a clear price before any work starts.
Our services
Epoxy Floor Coating Services in Myrtle Beach
From two-car garages to restaurant kitchens, every epoxy floor coating in Myrtle Beach we install starts with the same careful prep. Pick a service to see the system, the process and what affects the price.
Polyaspartic Floor Coating
A fast-curing, UV-stable coating for sunny garages, porches and shops.
Learn more
Metallic Epoxy Flooring
Seamless metallic finishes with depth for living areas, showrooms and salons.
Learn more
Commercial Epoxy Flooring
Seamless, cleanable floors for restaurants, retail stores, shops and warehouses.
Learn more
Concrete Polishing
Concrete that is ground, densified and polished, with no coating on top.
Learn more
Concrete Resurfacing
Crack, pit and spalling repair, resurfacing and sealing for worn slabs.
Learn moreCoating systems
Which Floor Coating System Is Right for Your Space?
Each system has a job it does best. Here is how the four main options compare.
| System | Best for | Look | Sun and outdoor use | Back in use (general range) |
|---|---|---|---|---|
| Flake epoxy | Garages, workshops, laundry rooms | Multicolor chips under a clear gloss or satin topcoat | Indoor; needs a UV-stable topcoat where direct sun hits | Several days before you park on it |
| Polyaspartic | Sunny garages, porches, floors that need a quick return | Clear or tinted topcoat, often over flake | UV-stable; suited to sunlit garages, porches and pool areas | Often 1 to 2 days |
| Metallic epoxy | Living areas, showrooms, salons | Swirled, pearl-like finish with depth | Indoor only | Several days; furniture after full cure |
| Polished concrete | Showrooms, warehouses, modern homes | Natural concrete with a satin to high-gloss sheen | Indoor floors | Same day once polishing ends |
Times are general ranges and change with temperature, humidity and the product used.
Flake Epoxy Floors
A base coat is fully broadcast with vinyl color chips, then sealed with a clear topcoat. The texture adds grip and hides dust, which makes flake a popular choice for garages along the Grand Strand.
See garage floor coating
Polyaspartic Coatings
Polyaspartic is a fast-curing coating that resists UV and hot tire pickup. It often goes over flake as the topcoat, so a garage or porch can go back into use sooner.
Learn about polyaspartic floor coating
Metallic Epoxy Floors
Metallic pigments move through the epoxy as it is worked, which creates swirls and depth, so no two floors look the same. Inside a home, a moisture test always comes first.
See metallic epoxy flooring
Polished Concrete
No coating at all: the slab is ground, hardened with a densifier and polished to the sheen you choose. A good fit for showrooms and warehouses with sound concrete.
Explore concrete polishingWe check your slab and recommend a system during a free on-site estimate.
How we work
Our Epoxy Floor Installation Process
A coating bonds only as well as the concrete under it allows, so most of the work happens before any color goes down.
1. Free On-Site Estimate and Moisture Test
We measure the space, check the slab for moisture and damage, and recommend a system with a clear price.
2. Diamond Grinding
Diamond grinding removes the top layer, old sealers and stains so the coating bonds to clean, open concrete.
3. Crack, Pit and Spalling Repair
Cracks, pits and spalled areas are filled and ground flush. Worn or badly damaged slabs get concrete resurfacing first.
4. Base Coat
A base coat goes down over the prepared slab and soaks into the surface of the concrete.
5. Color, Flake or Metallic Layer
We broadcast flake, apply solid color or work the metallic layer, depending on the system you chose.
6. Topcoat, Cure and Walk-Through
A clear topcoat seals the floor. We walk the finished floor with you and explain cure times and care.
Service areas
Epoxy Flooring Across the Grand Strand
Looking for an epoxy flooring contractor near you? We work from our location at 5082 Lafon Ln in Myrtle Beach and install epoxy floors in Myrtle Beach and the communities below. We also take projects in nearby areas such as Forestbrook, Little River and Longs.
Socastee, SC
Our home base, along the Intracoastal Waterway near the Socastee Swing Bridge.
Carolina Forest, SC
Master-planned neighborhoods with attached two-car garages.
Conway, SC
The Horry County seat, with older homes, new subdivisions and downtown businesses.
Surfside Beach, SC
“The Family Beach,” with raised beach homes and ground-level garages.
Garden City, SC
Beach cottages and condos near Garden City Beach and the pier.
Murrells Inlet, SC
Waterfront homes and screened porches near the MarshWalk.
North Myrtle Beach, SC
From Cherry Grove and Ocean Drive to Windy Hill, plus Barefoot Resort.
Pawleys Island, SC
Coastal homes in Pawleys Island and Litchfield, in Georgetown County.
Questions
Epoxy Flooring FAQs
The price of epoxy flooring in Myrtle Beach depends on the size of the floor, the condition of the slab, the system and the finish. As a national reference, HomeGuide (2026) lists epoxy flooring at $4 to $10 per square foot installed and $1,600 to $5,800 for a two-car garage. These are market ranges, not a quote. Your price comes after we see the floor during a free on-site estimate. Read more about garage floor coating.
Most garages take one to a few days of work, depending on the repairs and the system. A standard epoxy floor needs several days before you park on it. Polyaspartic floor coating cures faster, so the space is often back in use in one to two days. We give you the timeline for your floor at the estimate.
Both work when the slab is prepared right. Epoxy usually costs less and builds a thick base. Polyaspartic is UV-stable, cures faster and resists hot tire pickup, which matters in a Myrtle Beach garage that sits with the door open in the sun. Many garage systems combine both, with a polyaspartic topcoat over the flake. Compare them on our polyaspartic floor coating page.
Moisture rising through the slab is one of the main reasons coatings peel, and coastal humidity makes it a real concern on the Grand Strand. We test for moisture before we coat, grind the surface, repair damage and choose a system for the conditions. Salt and sand mostly affect the surface: a coated floor sweeps and rinses clean, and outdoor areas get UV-stable topcoats.
A smooth gloss finish can be slippery when wet. Flake adds texture, and an anti-slip additive can go into the topcoat. Outdoor areas such as pool decks and porches get a textured, slip-resistant finish. See pool deck coating and patio and porch coating for outdoor options.
In most cases, yes. Diamond grinding removes stains and old sealers, and cracks, pits and spalled areas are repaired before any coating goes down. If the slab is badly worn, concrete resurfacing comes first. We tell you what your slab needs during the estimate.
Yes. We install commercial epoxy flooring for restaurants, retail stores, shops and warehouses, and we plan the schedule around your operation. For a hard, low-maintenance floor without a coating, concrete polishing is another option.
We serve Myrtle Beach and the Grand Strand from our location at 5082 Lafon Ln, Unit 11, Myrtle Beach, SC 29588. That includes epoxy flooring in Socastee, Carolina Forest, Conway, Surfside Beach, Garden City, Murrells Inlet, North Myrtle Beach and Pawleys Island.
Call us or send the form. We will set up a free on-site estimate and recommend the right system for your slab.
- (843) 960-3710
- 5082 Lafon Ln, Unit 11, Myrtle Beach, SC 29588
- Open 24/7
Get a Free Epoxy Flooring Estimate
Send the details and we will contact you to schedule your free on-site estimate.